- #Raspberry pi 8192cu driver serial#
- #Raspberry pi 8192cu driver drivers#
- #Raspberry pi 8192cu driver driver#
> As the OTG makes the load heavy, so the OTG isn't opened by default, but users can replace the original script.bin with the one that has opened the OTG. > Deleted the redundant files in root file system to make system more light.
#Raspberry pi 8192cu driver serial#
> For Banana Pi, fixxed the problem that users cann't login through the serial port > For Banana Pi, fixxed the problem that Banana Pi could not be awake after it entering sleep mode > Installed the arduinio 1.5.4 and arduino 1.0.1 But arduino 1.5.4 cann't programe for Arudino ARM board Create the desktop inco for arduinio 1.5.4 > Replaced the default wallpaper to Banana Pi wall paper You can control all the pins through "sys/class/gpio" Edit the host name in these two locations: sudo nano /etc/hostname sudo nano /etc/hosts Adding WiFi support / EW-7811Un. > For Banana Pi, opened all pins on CON1, CON2, CON3, J11 and J12 ports in script.bin, the squece is based on RPi.
#Raspberry pi 8192cu driver driver#
> For Banana Pi, modified the sunxi-gpio driver source code and added it into kernel > For Banana Pi, changed power off time of pressing the power key to 4 seconds > For Banana Pi, added driver support for more Logitech HID devices,such as K330, K400. > For Banana Pi, the GMAC driver is now using the driver below the linux kernel source code. So you should be more caution in using this serial usb wifi dongle. For example, if you plug out the usb wifi dongle when the wifi has connected, and plug in it angain, the wifi can not connect this time, you must reboot the system.
#Raspberry pi 8192cu driver drivers#
> For Banana Pi, added more drivers support to usb wifi adapter,includes 8188eu serial and 8192cu serial But the 8192 seirals usb wifi are not very stable. > The default user login account is pi/ banana > Modify the u-boot information to Banana Pi They two can both boot normaly, and the main functions work OK. > This images can be used both on Banana Pi and Raspberry Pi boards. By default, the OTG is not opened as the OTG making the system load too much heavy, All the pins on CON1, CON2, CON3, J11 and J12 ports are opened in 'script.bin' file, users can control the pins through 'sys/class/gpio'. LeMaker also solved the problem that the Banana Pi could not be awake up after entering the sleep mode.Īrduino 1.5.4 and S4A v1.4 are pre-instlled on the images. LeMaker has fixed most of the bugs existed in Raspbian version 1.0, such as the problem that Logitech HID devices could not work. They two can both boot normally and work well. The images can be used both on Banana Pi and Raspberry Pi boards. This time LeMaker has updated the kernel to 3.4.90. Everyone can donwload it now for enjoying it. The newest image “Raspbian for BananaPi v2.0" has released.
0 kommentar(er)
